AVANTONE CK-6 Condenser Microphone + Shock Mount + Wooden Box + 6 meter XLR Lead

AVANTONE CK6 Cardioid FET Condenser Microphone + Shock Mount + Wooden Box + 6 meter XLR Lead

The AVANTONE “Cabernet (C-series)” mics from AVANT ELECTRONICS are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics.

The AVANTONE CK-6 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET mics…but at a fraction of their cost!

Our rugged CK-6 microphone body and capsule assembly are precision machined of BRASS.

Aesthetically the compact body  features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and grill.

The transformerless Discreet Class A FET circuitry will yield pleasing professional results comparable to much more expensive designs.

 Uses Include:    

Studio vocals, acoustic guitar, mandolin, drum overheads, piano, etc…

The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics.

The 80Hz HIGH-PASS filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from “muddying up” the track.

Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability.

The versatile CK-6 mic is able to produce professional results with a clean sonic character.

The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.

Transformerless CLASS A FET Microphone w/ 32mm gold sputtered thin Mylar capsule

-10 dB pad  &  80 Hz LF roll off switches

 STANDARD ITEMS SUPPLIED:

AVANTONE CK-6 CARDIOID FET Microphone

AVANTONE Custom Retro Shockmount

Elegant padded genuine wooden Mic box

Padded Aluminum storage / travel case

Owners Manual

 

 

Type:

True Transformerless Condenser
Polar Pattern: Cardioid
Frequency Response:  35-20,000 Hz +/- 3.5dB
Output Impedance: <=200 Ohms
Maximum SPL : 136dB (0.5% THD @1000Hz)
Equivalent Noise Level : <17dB
Output Connector: Male XLR 3 pin
High-Pass Switch 80 Hz -6dB/octave
Attenuation Switch -10 dB
Power Requirement: 48 volt Phantom
Included Accessories: Shockmount , Wooden Box in Metal Carrying Case
Finish: Polished Nickel trim / Metallic Cabernet Red Body
Size: 155mm x 46mm  
Weight: .4 kg / .9 lb

 

 GB Pounds


 

 

BACK