AVANTONE CK-7 Condenser Microphone + Shock Mount + Wooden Box + 6 meter XLR Lead

AVANTONE CK7 Multi-Pattern FET Condenser Microphone + Shock Mount + Wooden Box + 6 meter XLR Lead

The AVANTONE “Cabernet (C-series)” mics from AVANT ELECTRONICS are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics.

The AVANTONE CK-7 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to some of the very finest FET mics…but at a fraction of their cost!

Our rugged CK-7 microphone body and capsule assembly are precision machined of BRASS.

Aesthetically, it features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and grill.

The transformer coupled Discreet Class A FET circuitry will yield pleasing professional results comparable to much more expensive designs.

Any studio can proudly offer the CK-7 as a vocal mic or utility condenser due to its versatility…It exudes class visually as well as sonically.

 Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability.

The versatile CK-7 mic is able to produce professional results with a warm, pleasing sonic character.

The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.

 3-Pattern CLASS A FET Microphone w/ dual 35mm gold sputtered thin Mylar capsules

 -10 dB pad  &  80 Hz LF roll off switches

 

 Standard Included Items:

AVANTONE CK-7 Multi-Pattern FET Microphone

AVANTONE Custom Retro Shockmount

Elegant padded genuine wooden Mic box

Padded Aluminum storage / travel case

Owners Manual

 Uses Include:    

Studio vocals, acoustic guitar, mandolin, drum overheads, piano, room mic, etc…

The 3 patterns allow the CK-7 to be used in a variety of situations. The cardioid pattern is generally best used on vocals and single instruments. The omni mode works well in incorporating some room sound into the track. The figure 8 pattern allows 2 vocalists to use the mic at the same time from opposite sides.

The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics.

The 80Hz HIGH-PASS filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from “muddying up” the track.

Type:

True Condenser
Polar Pattern/s: Cardioid , Omni , Figure 8
Frequency Response:  20-20,000 Hz +/- 3dB
Output Impedance: <=250 Ohms
Maximum SPL : 139dB (0.5% THD @1000Hz)
Sensitivity : -38 dB (0 dB=1V/Pa)
Equivalent noise level: (A-Weighted per IEC 286-4) <16 dB
Output Connector: Male XLR 3 pin
High-Pass Switch 80 Hz 6dB/octave
Attenuation Switch -10 dB
Power Requirement: Standard 48 Volt Phantom / 5mA
Included Accessories: Wooden Box &  Shockmount, Metal  case
Finish: Polished Nickel trim / Metallic Cabernet Wine Red Body
Weight: .65 kgs  / 1.4 lbs
Dimensions: 187mm x 51mm  /  7.5" x 2"

 

 GB Pounds


 

BACK