Shure BETA 58 Dynamic Vocal Microphone + 6 meter XLR Lead

The Shure Beta 58 A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Shure Beta 58 A has a shaped frequency response that is ideal for close–up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the Shure Beta 58 A include lead vocals, backup vocals and speech.

Shure BETA 58 A features

• Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
• Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
• Neodymium magnet for high signal–to–noise output Hardened steel mesh grille that resists wear and abuse
• Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
• Minimally effected by varying load impedance
• Legendary Shure quality and reliability

Type

Dynamic (moving coil)

 

Frequency Response

50 to 16,000 Hz

  view larger 

 

NOTE: The curve above shows on-axis response at a distance of 2 feet from a uniform sound source. Your response may vary, depending on microphone position.

 

Polar Pattern

Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency.

 

Output Level (at 1,000 Hz)

Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV)

*1 Pa = 94 dB SPL

 

Impedance

Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z Phasing

Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3.

 

Case

Silver blue enamel-painted die cast metal with hardened, matte-finished, spherical steel mesh grille.

 

Adjustable, Stand Adapter

Slip-in microphone mounting, unbreakable, adjustable through 180 degrees with standard 5/8"-27 thread, black finish.

 

Dimensions

See User Guide.

 

Net Weight

278 grams (9.92 oz)

BACK