CAD PMP742C 7pc Drum Microphone Set + XLR Leads

Contains four TSM411's, one KBM412 and two ICM417's plus 4 x clamps in a protective travel case. Supplied with 6 meter XLR Leads.

The TSM 411 is a percussion / general purpose application microphone. The TSM 411 incorporates an all new "duo-point" suspension. This technology provides remarkable shock isolation and ballistic stability, which is very important for successful reproduction of sound sources originating from percussion instruments such as tom toms, snares, cymbals, conga's, guitar and keyboard amps, stacks, and other similar applications.

CAD TSM411 Applications

Brass, Guitar Cabinets, Bass Cabinets, Snare Drum, Rack/Floor Toms.

CAD TSM411 Specifications

*Operating Principle:*	Moving coil dynamic
*Polar Pattern:*	Supercardioid
*Frequency Response:*	100Hz to 15KHz
*Sensitivity:*	-56dBV (1.6mV) @ 1 Pa
*Impedance:*	310 ohms

Specifications are subject to change without notice.

The KBM412 is a large diameter, Neodymium dynamic microphone, specifically designed for bass drum and other low frequency sources. Packaged in a rugged die-cast body with a hardened external screen providing additional protection from incidental striking. The KBM412 was designed to provide extended low-end frequency response, along with high SPL handling capability The KBM412 delivers exceptional performance as a kick and large tom microphone and will deliver excellent performance when used to mic bass and large diameter percussive instruments and other similar applications.

CAD KBM412 Applications

Bass Cabinet, Kick Drum, Rack/Floor Toms.

CAD KBM412 Specifications

*Operating Principle:*	Moving coil dynamic
*Polar Pattern:*	Cardioid
*Frequency Response:*	30Hz to 12KHz
*Sensitivity:*	-66dBV (0.5mV) @ 1 Pa
*Impedance:*	60 ohms

Specifications are subject to change without notice.

Packaged in a rugged small, all metal body, the ICM417 electret condenser microphone provides natural, transparent sound quality. The transformerless design of this cardioid condenser provides optimum low frequency response and low distortion. Designed for use with cymbals, overheads, and stringed instruments, the wide, flat frequency of the ICM417, coupled with the CAD exclusive I.N.R.T shockmount, make this an extremely high quality percussion microphone, as well.

CAD ICM417 Applications

Acoustic Instrument, Strings, Cymbals/Overheads, Hi-hat.

CAD ICM417 Specifications

*Operating Principle:*	Condenser
*Polar Pattern:*	Cardioid
*Frequency Response:*	80Hz to 20KHz
*Sensitivity:*	-28dBV (18mV) @ 1 Pa
*Impedance:*	480 ohms
*Max SPL:*	120dB, 1% THD
*Self Noise:*	26dBA
*Power Requirements:*	P12, P24, P48, 5mA

Specifications are subject to change without notice.

BACK