| The
RØDE VideoMic Pro raises the bar set by the original RØDE VideoMic, by
combining broadcast quality audio with an ultra compact and lightweight
ergonomic design.
Incorporating
new features specific to high end video, the VMP also evolves many of
the features that have made the VideoMic so successful. Noise
transference has been significantly reduced using both a revised, more
elegant shock mounting system and a lightweight premium cable.
- Broadcast
recording quality condenser microphone
- Compact
design (only 150mm/6" length)
- Ultra
lightweight (only 85g/3oz)
- 9V
battery powered, with up to 70 hours battery life (alkaline)
- Integrated
shock mounting
- Integrated
foam windshield
- 3.5mm
stereo mini-jack output (dual mono)
- Two
step High Pass Filter (flat, 80Hz)
- Three
position level control (-10dB, 0, +20dB)
- Camera
shoe mount with 3/8" thread for easy boompole mounting
- Ten
year warranty*
| Power |
9V
alkaline battery (Current 7.8mA) |
| Acoustic
Principle |
Line
Gradient |
| Directional
Pattern |
Super-Cardioid |
| Frequency
range |
40Hz-20kHz,
selectable HPF @ 80Hz/12dB/octave |
| Output
impedance |
200Ω |
| Signal
noise ratio |
74
dB SPL (A - weighted per IEC651) |
| Equivalent
noise |
20
dB SPL (A - weighted per IEC651) |
| Maximum
SPL |
134dB
SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum
output voltage |
+6.9dBu
(@ 1% THD into 1kΩ) |
| Sensitivity |
-38
dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Weight |
85g/3ozgm |
| Dimensions |
95mm/3.74"mmH
x 43mm/1.69"mmW x 150mm/6"mmD |
|
