sE ELECTRONICS 4400a Condenser Mic + 6 metre XLR Lead





sE ELECTRONICS 4400a Condenser Mic + 6 metre XLR Lead
The 4400a is the latest in a lineage of mics
started 6 years ago with our sE2200a. Based on the same capsule tuning, but with
a dual capsule to give multi polar pattern function, this mic is a rarity… a
true all-rounder.
It has 4 polar patterns, Cardioid, Hypercardioid, Figure of 8 and Omni. 2 bass
cuts at 60Hz and 120Hz; 2 pads at 10 and 20dB. The chassis is small… very
small, but still manages to house a twin diaphragm 1” capsule and all the top
grade electronics and switches. This flat, round edged chassis design allow the
mic to be used flat onto a drumhead or guitar cab, or pushed through into the
skin of a kick drum. It is also perfect for sung vocals and voice over work,
because although it’s the smallest mic of it’s type, it still ‘looks’
big when used full face on. It is extremely thin at less than 3/4” and fits
neatly in the palm of your hand.
sE4400a has a unique, black, non-reflective,
non-marking, rubberised finish which is ideal for live stage, theatre, TV and
broadcast applications which require lighting.
Finally, the capsule has been specially tuned after almost 2 years of pre-market
tests with professional studios and broadcasters, to really be something that
very few mics can; the true all-rounder. Vital in professional studio or
broadcast applications where an engineer needs to know he can reach for a mic
that will handle any job, and equally for the home studio user who is on a
budget and needs one mic to suit every occasion. The mic is multi-functional yet
uncluttered, the sound is smooth and flattering and yet, because the capsules
are hand made (like all sE mics) and then individually tuned, it benefits from
lacking the usual hyped top end of most modern mass produced mics from automated
machines.
It comes with a unique shock mount which allows you to fit the mounted mic into
tiny spaces, or invert the shock clamp to extend the mic fully outside the shock
mount for close mic-ing applications or vocals. It also comes with a full, steel
re-enforced, black aluminium, signature sE flight case.
Available also as a stereo pair, hand-matched at the factory, this mic is set to
be a classic.
| Frequency Response: 20Hz-20KHz |
| Sensitivity: 14.1mv/pa-34 ± 1dB |
| Polar Pattern: Cardioid, Figure 8, Omni, supercardioid |
| Impedance: ≤ 50 Ohms |
| Equivalent Noise Level: 17dB(A weighted) |
| Max SPL for 0.5% THD@1000Hz: 130dB |
| Power Requirement: Phantom power 48V±4V |
| Connector: 3-pin |