CAD Stage 7 7pc Drum Microphone Set + XLR Leads

CAD Stage 7 7pc Drum Microphone Set + XLR Leads


The CAD Stage7 is a seven-piece drum mic pack that includes one D10 cardioid dynamic mic, three D29 dynamic tom mics, with intergrated clips, and one D19 dyanmic snare drum mic, with intergrated clip and two C9 instrument condensers for hi-hats, cymbals or overheads. The pack includes a vinyl carrying case with strap for easy transport and storage.

 

D10 Specifications

Operating Principle: Moving coil dynamic
Polar Pattern: Cardioid
Frequency Response: 30Hz to 12KHz
Sensitivity: -66dBV (2.2mV) @ 1 Pa
Impedance: 60 ohms

Specifications are subject to change without notice.
TM211 polarfreq

 

D19 Specifications

Operating Principle: Moving coil dynamic
Polar Pattern: Supercardioid
Frequency Response: 90Hz to 14KHz
Sensitivity: -56dBV (1.6mV) @ 1 Pa
Impedance: 300 ohms

Specifications are subject to change without notice.
SN210 polarfreq

 

D29 Specifications

Operating Principle: Moving coil dynamic
Polar Pattern: Cardioid
Frequency Response: 50Hz to 16KHz
Sensitivity: -66dBV (0.5mV) @ 1 Pa
Impedance: 60 ohms

Specifications are subject to change without notice.
KM212 polarfreq

 

C9 Specifications

Operating Principle: Condenser
Polar Pattern: Cardioid
Frequency Response: 40Hz to 13KHz
Sensitivity: -41dBV (8.9mV) @ 1 Pa
Impedance: 230 ohms
Hi Pass Filter 200Hz, 6dB/oct
Attenuator 10dB
Power Requirements 48v Phantom Power

Specifications are subject to change without notice.
KM212 polarfreq

 

 GB Pounds


 

 

BACK