RoXdon VB-1 Vocal Booth

The RoXdon VB-1 Vocal Booth is designed to provide an acoustically favorable environment to record studio quality vocals.
It enables 'Dry' vocals to be recorded in a room that has had no acoustic treatment by absorbing unwanted reflections by means of
the advanced 'pyramid' surface, acoustic foam. 
The RoXdon VB-1 can be attached to any sturdy microphone stand by means of two rubber protected clamps on the rear of the booth.
Any standard thread, mic clip or shock mount can be attached using the fully adjustable mounting hardware supplied.  Alternatively, the microphone mount can be attached to the mic stand boom (not supplied) and hung vertically from above as shown in the above pictures. 
The lower fixing can then be used to mount a gooseneck pop filter.
For added height, the VB-1 can be attached to the boom section of a suitable Microphone Boom Stand if set in an upright position. 

Unlike other similar units, the RoXdon VB-1 Vocal Booth has two front wings that are adjustable to vary the acoustic
ambience. These can be locked in position by the upper and lower wing screws. 

MIC STAND / MICROPHONE / SHOCK MOUNT NOT INCLUDED

BACK